DAY & NIGHT SHIFTS AVAILABLE. Greensburg, La.

GENERAL SUMMARY: A worker who welds together heavy structural metal components as specified by blueprints, work orders, or oral instructions and assembles subparts into completed assemblies prior to welding as specified by blueprints, work orders, or oral instructions under direct supervision. This position is comprised of both welder and fitter job duties.

DESIRED EDUCATION, KNOWLEDGE, AND/OR SKILLS:

• High school diploma/GED equivalent
• Valid driver’s license
• Written and verbal communication skills
• Knowledge of basic shop mathematics
• Experience in heavy structural fabrication
• Ability to read and understand blueprints, shop drawings and welding symbols
• Proficient in effective operation of welding equipment
• 1-2 years welding experience with some flux core welding (FCAW)
• Must pass welding test as part of the application process

WELD DUTIES:

• Perform welding tasks as directed under the direction of the immediate supervisor.
• Identify and adhere to the appropriate Weld Procedure for the task at hand.
• Provide quality welds that meet specifications and approval of the Quality Control Inspector and Production Manager. This includes, but is not limited to, proper weld size, weld profile, cleaning, preheating, ect.
• Complete any relevant specific job duties as required by immediate supervision
• Confirm temporary bracing is installed as needed to avoid distortion and remove bracing when complete.
• Operate punches, grinders, drills, saws, oxy-fuel torches, plasma cutters, and other basic equipment & hand tools.
• Move and/or organize material as needed to support production tasks.
• Maintain a clean and orderly workstation.

FIT DUTIES:

• Perform fitting tasks under the direction of the immediate supervisor
• Assess blueprints, drawings, and specifications to establish work requirements
• Organize work orders, and prepare accurate reports regarding tools, equipment, materials daily
• Conduct exact measurements, layout, and fitting tasks per drawings/diagrams in accordance with Southland’s procedures.
• Provide visual quality assurance
• Complete any relevant specific job duties as required by immediate supervision
• Operate punches, grinders, drills, saws, oxy-fuel torches, plasma cutters, and other basic equipment and hand tools.
• Cut, drill, bevel and grind subparts as required to perform a quality end product.
• Perform weld prep (grinding, beveling, ect) as required.
• Install temporary bracing as required to prevent distortion during the welding process.

SAFETY REQUIREMENTS:

• Adhere to all Southland Steel Fabricator’s, Inc. Safety Rules, Policies, and Procedures
  • Maintain orderly and clean work area
  • Attend all required safety meetings
• Inspect the welding equipment each day to ensure it meets safety standards with special attention to welding leads
• Must inspect tools daily before each use, to include extension cords
• Use hand and power tools safely at all times with correct guards in place
• Wear personal protective equipment in accordance with policy and adequate for specific tasks
• Welding - Wear specific Personal Protective Equipment (PPE),including but not limited to:
  • Welder’s helmet with appropriately shaded filter lens, with safety glasses under helmet
  • Fire/flame resistant clothing
  • Heavy flame resistant gloves
  • Respirators when welding harmful metals or when ventilation is not adequate
  • Steel/hard toe boots
  • Hearing protection
• Cutting steel with torch:
  • Wear either properly shaded safety glasses with a face shield or cutting goggles, hearing protection, steel/hard toe boots, gloves, and fire/flame resistant clothing
  • Use proper friction lighters or other approved devices to light the torch

PHYSICAL AND ENVIRONMENTAL REQUIREMENTS:

In order to do the job, the following physical requirements are necessary:

• Ability to stand for long periods of time
• Ability to occasionally pull, push, carry, or lift tools, equipment or materials 50 lbs. or less
• Ability to withstand occasional bending, squatting, or crouching
• Ability to frequently handle (hold, seize, grasp, turn, etc.) tools, equipment, or material
• Ability to work in inclement weather conditions, to include cold, heat, and humidity

Wage: DOE & Classification

Position requires pre-employment drug screening and background check

Management Discretion: The job duties and requirements that this document describes may be altered or supplemented at any time at the sole discretion of the employer

Employment-at-Will: This document does not create an employment contact, either express or implied. All employment is at-will.

Welder Classifications

GENERAL SUMMARY: Southland’s welders are classified according to the knowledge, skill level, and productivity.

Class A:

A Class A Welder the has highest level of knowledge, skill and productivity. He/she is capable of welding all types of joints encountered at Southland. This includes, but is not limited to, back-gouging, multi-pass fillet welds and CJP welds. Class A welders will frequently be certified in other types of welding (i.e., SMAW, vertical, overhead) beyond Southland’s standard entry test. Furthermore, Class A Welders will often function as trainers & leaders for entry level personnel.

Class B:

Class B welders must maintain high levels of production with minimal errors or NCR’s. They shall be capable of multi-pass fillet welds, PJP, back-gouging and occasional UT welds. Class B work will typically contain columns with heavy plates & complex joints.

Class C:

Class C welders are entry level welders. This classification will be issued upon passing Southland’s entry level weld test. Class C welders must be capable of maintaining reasonable production with minimal NCR’s. Typical work includes single & multi-pass fillet welds on beams & simple columns.

Fitter Classifications

GENERAL SUMMARY: Southland’s fitters are classified according to the knowledge, skill level, and productivity.

Class A:

A Class A fitter has highest level of knowledge, skill and productivity. He/she is capable of fitting all types of fabrication encountered at Southland. This includes, but is not limited to, complex beams, columns, frames & stair stringers. Class A fitters must maintain high levels of production with minimal errors or NCR’s. They should be capable of working multiple tables congruently with the helpers and lower class fitters. Furthermore, Class A will often function as trainers & leaders for entry level personnel.

Class B:

Class B fitters maintain a level of production with minimal errors/NCR’s. They shall be capable of fitting heavy beams & columns and all standard connection types encountered at Southland Steel. Examples include base plates, clip angles, shear tabs, moment connections, corner brackets, ect. They must be capable of productively fitting heavy plates & be familiar with all aspects of fabrication. This includes correcting cut lengths, hole placement, mill tolerances, sweep, camber, ect.

Class C:

Class C fitters are entry level fitters. They must be capable of working independently as a fitter. This includes reading & interpreting blueprints, laying out beams & fitting attachments. They must have a complete understanding of material sizes, shapes, drawings, layout and measuring. A Class C fitter must maintain reasonable production with minimal quality levels.