Job description

Responsibilities for Crane Operator:

*Possess a valid CDL Class A license or B Commercial license

*Have a current NCCCO certification listing Fixed Cab Mobile.

*Have a minimum of three (3) years operating experience.

* The operator will drive the crane to the work site and properly set up per manufacturers manual and adhere to company rules and safety standards regarding rigging, cribbing/matting, as required to safely perform job.

*The operator will direct the activities of the truck drivers, riggers and signalpersons to set up and break down the crane as needed.

*The operator must understand and be able to properly complete a job ticket for a customer to sign and accept responsibility for the jobsite and billing.

*The operator must be knowledgeable of OSHA and ANSI standards in crane operation.

*The operator must be able to read and speak the English language.

*The operator must possess a minimum of a high school diploma or equivalent.

*The operator must be able to pass a drug test.

*Must have the desire to work in a high performance, fast paced environment.

National Crane Series 900H
Product Guide

Features

• 24,5 t (27 USt) rating
• 32 m (105 ft) four-section boom
• Multi-position Easy Reach control panel
• Graphical LMI

Features

Graphical LMI
The Graphical Load Moment Indicator
(LMI) is standard on all Series 900H machines. The LMI system displays all crane load lifting values simultaneously while providing real-time information about the crane and truck operating system and includes work area definition system (WADS) and operating limits.
The LMI is also weatherproof and visible in full or low light.

Options to get the job done

• An auger attachment is available on the

28,9 m (95 ft) boom reaching a max digging radius of 11,8 m (39 ft) with full outrigger span

• Personnel basket options are available to allow

"HO"-style outriggers versatility in operating conditionsTwo sets of “HO”- style outriggers with 6,09 m(20 ft) full span, 4,27 m (14 ft) mid span setting with manual locks and fully retracted outrigger spread. Main outriggers are equipped with removable ball and socket aluminum foot pads.Easy Reach controlsThe Easy Reach control station can be tilted to the right or left side of the crane as needed and can be stowed in the center position for transport.The single axis pilot operated crane controls allow smooth operation for each crane function.FeaturesPerformance you can rely on

• Bearings on the boom and retract cables can be greased through access holes in the boom side plates
• Number of internal boom parts has been reduced, deceasing service time when rebuilding the machine
• Internal anti-two-block wire routing eliminates damage potential
• Painting crane components before assembly reduces the possibility of rust, improves serviceability and enhances the appearance of the machine
• State of the art control valve provides smoother operation. The new design eliminates parts, reducing repair costs and improving the machines serviceability
• Speedy-reeve boom tip and sheave blocks simplify rigging changes by decreasing the time needed to change line reeving
• The Series 900H is standard with 410° non-continuous rotation
• Two-speed hoist provides faster winch payout and pickup of unloaded cable
• The stronger standard torsion box improves rigidity, reduces truck frame flex and reduces the need for counterweight
• A control knob located on the swing motor brake release valve can be easily adjusted to the crane operator's swing speed preference
• Easy Glide boom wear pads reduce the conditions that cause boom chatter and vibration. The net result is smoother crane operation

*Product may be shown with optional equipment.

Contents

Mounting configurations 5

Specifications 6

Capacities 8

Dimensions 10

Accessories 11

Mounting configuration
NOTE: 95’ BOOM SHOWN

.
.

.
. MIN.

. MIN.
. MIN.

° . MIN.
FULL CAPACITY lb BARE MIN.
WORK AREA lb BARE MIN.

, lb GARW MIN. , lb GARW MIN.

The mounting configuration is based on an 85% Note: Chassis will require extended front frame rails stability factor. If the bare truck weight requirements for SFO addition. are not met, counterweight will be required. The For 360˚ stability the truck frame must have a complete unit must be installed on the truck in 327 cm3 (20.0 in3) section modulus [248,566 N.m accordance with factory requirements. Since individual (2,200,000 in-lb) RBM] minimum under the crane truck chassis vary, a test must be performed on the unit frame, 245 cm3 (15 in3) section modulus [186,424 to verify actual stability after mounting and counter- N.m (1,650,000 in-lb) RBM] at the front spring rear weighting (if required). A summary of mounting and hanger, 163 cm3 (10 in3) section modulus [124,283 truck requirements are: N.m (1,100,000 in-lb) RBM] through the front spring
For 180 degree working area – and 49 cm3 (3 in3) section modulus [37,284 N.m
Gross Axle Weight Rating Front (GAWR) – 9072 kg (330,000 in-lb) RBM] at the stabilizer attachment

(20,000 lb) point on each truck frame rail.
Gross Axle Weight Rating Rear (GAWR) – 18 144 kg NOTE 1: Gross Vehicle Weight Rating (GVWR) is

(40,000 lb) dependent on all components of the vehicle
Gross Vehicle Weight Rating (GVW) – 27 216 kg (axles, tires, springs, fame, etc.) meeting

(60,000 lb) manufacturers’ recommendations; always
Wheelbase (WB) – 6,50 m (256 in) specify GVWR when purchasing trucks.
Cab to Axle Trunnion (CT) – 4,90 m (193 in)
After Frame (AF) – 2,67 m (105 in) min. NOTE 2: Diesel engines require a variable speed
Frame Section Modulus (SM) from outrigger to governor and energize-to-run fuel solenoid

RSOD – 327cm3 (20 in3) and 759 MPa for smooth crane operation; electronic fuel
(110,000 psi) material injection is required.

Bare chassis weight required for stability prior to NOTE 3: All mounting data is based on a National installation Crane Series 900H with subbase and an

Front – 3992 kg (8880 lb) 85% stability factor.
Rear – 4309 kg (9500 lb) NOTE 4: The complete unit must be installed in
For 360 degree working area – accordance with factory requirements,
Optional Single Front Stabilizer (SFO) and a test performed to determine actual
Gross Axle Weight Rating Front (GAWR) – 9072 kg stability and counterweight requirements;

(20,000 lb) contact the factory for details.
Gross Axle Weight Rating Rear (GAWR) – 18 144 kg NOTE 5: Transmission neutral safety interlock switch

(40,000 lb) is required. Truck transmission must be
Gross Vehicle Weight Rating (GVW) – 27 216 kg capable of having a neutral safety switch

(60,000 lb) added.
Wheelbase (WB) – 6,50 m (256 in)
Cab to Axle Trunnion (CT) – 4,90 m (193 in)
After Frame (AF) – 2,67 m (105 in) min.
Frame Section Modulus (SM) from front spring hanger to end of after frame – 327cm3 (20 in3) and
759 MPa (110,000 psi) material

Bare chassis weight required for stability prior to installation

Front – 3992 kg (8800 lb)
Rear – 4309 kg (9500 lb)

Series 900H 5

Specifications

Boom and jib combinations data

Available in two basic models.

Model 995H — Equipped with a 8,99 m – 29,0 m (29.5 ft – 95 ft) four-section boom. This model can be equipped with a
7,62 m –13,41 m (25 ft – 44 ft) two section jib. Maximum tip height with 13,41 m (44 ft) jib is 44,63 m (148 ft).

8,83 m – 29,0 m (29 ft – 95 ft) four-section boom. 9FJ44M 7,62 m – 13,41 m (25 ft – 44 ft) two-section jib

Model 9105H — Equipped with a 9,69 m – 32,0 m (32 ft – 105 ft) four-section boom. This model can be equipped with a
7,62 m – 13,41 m (25 ft – 44 ft) two-section jib. Maximum tip height with 13,41 m (44 ft) jib is 49,68 m (158 ft).

10,05 m – 32,0 m (33 ft – 105 ft) four-section boom. 9FJ44M 7,62 m – 13,41 m (25 ft – 44 ft) two-section jib

Note: Maximum tip height is measured with outriggers/stabilizers fully extended.

6

Specifications

900H winch data

NOTICE part line part line part line part line part line part line part line

• Do not deadhead line block against boom tip when extending boom
• Keep at least wraps of loadline on drum at all times
• Use only / in diameter rotation resistant cable with

, lb breaking strength on this machine

• Maximum capacity with high speed winch is lb

ft boom
ft ft ft ft ft ft ft

Maximum Boom Length at Maximum Boom and jib
Elevation with Rigging Shown with Load

Block at Ground Level ft boom
ft ft ft ft ft ft ft

Boom and jib
Winch Cable Average Lift and Lift and Lift and Lift and Lift and Lift and Lift and supplied breaking speed speed speed speed speed speed speed strength

/ in , lb lb , lb , lb , lb , lb , lb , lb
Low diameter speed fpm fpm fpm fpm fpm fpm fpm rotation winch resistant

High / in , lb lb lb lb , lb , lb , lb , lb diameter speed + fpm fpm fpm fpm fpm fpm fpm rotation winch resistant

All winch pulls and speeds are shown on the fourth layer. Winch line pulls would increase on the first, second and third layers. Winch line speed would decrease on t Downhaul weight lb the first, second and third layers. Winch line pulls may be limited by the winch t sheave block lb capacity or the ANSI to cable safety factor. These are shown below: t sheave block lb

Winch th layer drum pull Allowable cable pull t sheave block lb

Standard planetary lb low speed lb
lb “burst of speed”

Series 900H 7

Capacities

Series 995H: 95 ft boom with 25 ft – 44 ft jib, full span outrigger and stabilizer

National Crane will send you a chart on request – or you may secure needed load rating information through your nearest National
Crane dealer.

CAUTION:

• Do not operate crane booms, jib extensions, any

nd Jib °
' ° accessories or loads within 3 m (10 ft) of live power

Do not move lines or other conductors of electricity.
° unloaded boom

st Jib beyond limit line
' Jib and boom capacities shown are maximum for each

° section.
.° Do not exceed capacities at reduced radii.

• Load ratings shown on the load rating charts are

.°
D maximum allowable loads with the outriggers properly extended on a firm, level surface and the crane leveled and
C

° Stability Limit mounted on a factory recommended truck.
Line with lb

B Block Always level the crane with the level indicator located on
° the crane.

A The operator must reduce load to allow for factors such
°

as wind, ground conditions, operating speeds and their
Structural Limit
Line with ' Jib

° effects on freely suspended loads.
Erected

• Overloading this crane may cause structural collapse or

° instability.

°

• Weights on any accessories attached to the boom or

loadline must be deducted from the load chart capacities.
Operating radius Structural Limit Line from C/L rotation RADIUS IN FEET with ' Jib Erected Do not exceed jib capabilities at any reduced boom with unloaded boom lengths.
MID SPAN FULL SPAN FULL SPAN MID SPAN Do not deadhead lineblock against boom tip when extending boom or winching up.
' FULL SPAN '" FULL SPAN Keep at least three wraps of loadline on drum at all times.

OUTRIGGER LOCK PINS MUST BE DISENGAGED STABILIZER LOCK PINS MUST BE DISENGAGED

• Use only specified cable with this machine.

Load chart

ft ft BOOM RATED LOADS WITHOUT JIB ft ft JIB RATED LOADS
LOADED LOADED A LOADED B LOADED C LOADED D LOADED LOADED LOADED

LOADED BOOM ft BOOM ft BOOM ft BOOM ft BOOM ft BOOM ft LOADED BOOM ft BOOM ft
RADIUS ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM RADIUS ANGLE JIB ANGLE JIB

ft deg lb deg lb deg lb deg lb deg lb deg lb ft deg lb deg lb

. ,
. , . , .
. , . , .
. , , . , . .
. , . , . , . , . .
. , . , . , . , . .
. , , . , . , . , .
. , . , . , . , . , . , . .
. , . , . , . , . , . .
. . . . . . .
. . . . .
. . . . . .
. . . . .
. . . . .
. . . .
. . . .
. .
. .
.
.
.

RATED LOAD REDUCTIONS WITH STOWED JIB Note:
ft ft JIB STOWED 1. All capacities are in pounds, angles in degrees and radii in feet.

BOOM
LENGTH 2. Loaded boom angles are given as reference only.

ft 3. Shaded areas are structurally limited capacities.
Reduce load lb
Reduce load lb 4. Handling of personnel is only permitted with full span extension of all outrigger and
Reduce load lb stabilizer beams.
Reduce load lb
Reduce load lb
Reduce load lb

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.

8 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

BOOM LENGTH IN FEET

HEIGHT IN FEET

Capacities

Series 9105H: 105 ft boom with 25 ft – 44 ft jib, full span outrigger and stabilizer

National Crane will send you a chart on request – or you may secure needed load rating information through your nearest National
Crane dealer.

2nd Jib 80° CAUTION:
44' 70° 160 Do not operate crane booms, jib extensions, any

1st Jib 60° accessories or loads within 3 m (10 ft) of live power lines
25' 140 Do not move

50.8° unloaded boom or other conductors of electricity.
50° beyond limit line. Jib and boom capacities shown are maximum for each

105 120 section.
48° Do not exceed capacities at reduced radii.

90
100 Load ratings shown on the load rating charts are maximum

76 allowable loads with the outriggers properly extended on a
40°

80 firm, level surface and the crane leveled and mounted on a
61 Stability Limit

Line with 150 lb factory recommended truck.
30° Block

60 Always level the crane with the level indicator located on the
46 crane.

20°
32 The operator must reduce load to allow for factors such as

40
Structural Limit wind, ground conditions, operating speeds and their effects

10° Line with 44' Jib
Erected on freely suspended loads.

20 Overloading this crane may cause structural collapse or
A B C D 0°

-10° instability.
0 Weights on any accessories attached to the boom or loadline

0 20 40 60 80 100 120
Operating radius from C/L rotation Structural Limit Line

RADIUS IN FEET must be deducted from the load chart capacities. with 25' Jib Erected with unloaded boom Do not exceed jib capabilities at any reduced boom lengths.

• Do not deadhead lineblock against boom tip when extending

MID SPAN FULL SPAN FULL SPAN MID SPAN boom or winching up.

• Keep at least three wraps of loadline on drum at all times.

20' FULL SPAN 18'6" FULL SPAN Use only specified cable with this machine.
OUTRIGGER LOCK PINS MUST BE DISENGAGED STABILIZER LOCK PINS MUST BE DISENGAGED

Load chart

ft ft BOOM RATED LOADS WITHOUT JIB ft ft JIB RATED LOADS
LOADED LOADED A LOADED B LOADED C LOADED D LOADED LOADED LOADED

LOADED BOOM ft BOOM ft BOOM ft BOOM ft BOOM ft BOOM ft LOADED BOOM ft BOOM ft
RADIUS ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM ANGLE BOOM RADIUS ANGLE JIB ANGLE JIB

ft deg lb deg lb deg lb deg lb deg lb deg lb ft deg lb deg lb

. , .
. , . , . .

. , , . .
. , . , . , . .
. , . , . , . , . .
, , . , . , . .
. , . , . , . , . , . .
. , . , . , . , . , . , .
. , . , . . . . .
. . . . . .
. . . . .
. . . .
. . . .
. . .
. .
. . .
. .
. .
.
. .
.

RATED LOAD REDUCTIONS WITH STOWED JIB Note:
ft ft JIB STOWED

BOOM 1. All capacities are in pounds, angles in degrees and radii in feet.
LENGTH

ft 2. Loaded boom angles are given as reference only.
Reduce load lb 3. Shaded areas are structurally limited capacities.
Reduce load lb 4. Handling of personnel is only permitted with full span extension of all outrigger and
Reduce load lb
Reduce load lb stabilizer beams.
Reduce load lb
Reduce load lb

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.

Series 900H The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9

BOOM LENGTH IN FEET

HEIGHT IN FEET

Dimensions

10

Weight and centers of gravity include boom, winch, rope, turret, lift cylinder, frame, controls, outriggers, platforms, torque box, boom rest, bumper, downhaul weight.

G H Weight

995H 2423 mm (95.4 in) 1504 mm (59.2 in) 9232 kg (20,352 lb)

9105H 2654 mm (104.9 in) 1539 mm (60.6 in) 9566 kg (21,090 lb)

Above weights and centers of gravity do not include reservoir, RSOD, jib, PTO, pump, bed, SFO.

TAILSWING
1898 (74.70)

NOTE: All dimensions are in mm in unless otherwise specified

9105H 995H
9,69 m (32') RETRACTED 8,99 m (29'6'') RETRACTED

32 m (105') EXTENDED 28,96 m (95') EXTENDED C/L
ROTATION

943
(37.12)

2946
(116)

2216 2281
(87.25) 1986

TITLE:

DO NOT SCALE DRAWING DO NOT SCALE DRAWING A mainlayout
SCALE: 1:128 WEIGHT: SHEET 1 OF 1

5 3 2 1

(78.19) (89.8)

H MOUNTING

MOUNTING SURFACE

SURFACE

1456
1462 (57.34)

(57.57) 2261 (89.00)
RETRACTED

784
(30.88) 2438 (96.00)

G 610 (24.00]
2854 (112.36)

6102 (240.22) FULL-SPAN EXTENSION
4267 (168.00) MID-SPAN EXTENSION

Accessories

Radio Remote Control –
Four-function radio remote control for standard unit and 6-function remotes with auger. NB6R

Steel Bulkhead BHSD

Spanish-language Danger Decals, function control labels SDD and Operators’ Manuals SOM

Heavy-duty personnel basket –
544 kg (1200 lb) capacity steel basket with safety loops for two passengers. Gravity leveling 183 cm x 107 cm (72 in x 42 in) platform. Fast attachment and secure locking BSA-1
systems. Load chart must show 1043 kg (2300 lb) minimum to operate this accessory. BSA-R1 (provides rotation)

BSAY-1

• BSAY-2

Winch drum Rotation Indicator WDRI

Auger option 95 ft boom only
14,000 ft-lb two speed auger. Maximum digging radius 39 ft (full outrigger and stabilizers only).

Oil Cooler
Oil coolers recommended for duty cycle applications. OC

Hinged Vandal Cover Protector VCP
With keyed lock for LMI display.

Series 900H 11

Regional headquarters

Manitowoc - Americas Manitowoc - Europe, Middle East, Africa Manitowoc - Asia Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955

Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
This document is non-contractual. Constant improvement and engineering progress

Americas Portugal Factories make it necessary that we reserve the right to make specification, equipment, and price

Brazil Baltar changes without notice. Illustrations shown may include optional equipment and

Brazil accessories and may not include all standard equipment.
Alphaville Russia Alphaville
Mexico Moscow

China
Monterrey U.A.E. TaiAn
Chile Dubai Zhangjiagang
Santiago U.K. France

Buckingham Charlieu
La Clayette

Europe, Middle East, Moulins
Africa Asia - Pacific

Germany
Czech Republic Australia
Netvorice Brisbane Wilhelmshaven

France Melbourne India
Pune

Baudemont Sydney

Cergy China Italy

Decines Beijing Niella Tanaro

Germany Chengdu Portugal

Langenfeld Guangzhou Baltar
India Fânzeres

Hungary Delhi
Budapest Slovakia

Hyderabad Saris
Italy Pune
Lainate USA

Korea Manitowoc
Netherlands Seoul Port Washington
Breda Philippines Shady Grove
Poland Makati City
Warsaw Singapore

©2010 Manitowoc
Printed in USA
Form No. 900H
Part No. 900H / 1110 / 2M www.manitowoc.com

Job Type: Full-time

Salary: $28.00 - $35.00 per hour

Benefits:

• Health insurance
• Paid time off

Schedule:

• 10 hour shift
• 8 hour shift
• Monday to Friday
• Weekend availability

Supplemental pay types:

• Signing bonus

People with a criminal record are encouraged to apply

Ability to commute/relocate:

• Phoenix, AZ 85041: Reliably commute or planning to relocate before starting work (Required)

License/Certification:

• Driver's License (Preferred)

Shift availability:

• Day Shift (Preferred)

Work Location: In person

gatheringourvoice.org is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, gatheringourvoice.org provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, gatheringourvoice.org is the ideal place to find your next job.